Back On The Road!

Well, Coventry's Finest is back on the road!

That last run of work was not a small one, but the car is in significantly better shape than when it entered that phase. I finally resolved the brake issue when I found that the new caliper pistons I installed were actually slightly out of round and were locking up in the calipers. Before getting all that right however, I had also rebuilt the master cylinder.

In the process of rebuilding the brake master cylinder, I found that the clutch master cylinder was completely blown. It still operated, but it was leaking heavily. The rebuild on it was quick, but I found that the cylinder casting was completely shot. I ended up using an old Girling casting which was in perfect shape. I used several other parts from the old cylinder, including the piston.

So, here is the latest list:

Rebuilt Rear Hubs - rebuilt by Phil (all other items rebuilt by myself)
New Outer Universal Joints
Rebuilt Front Hubs
Rebuilt Front Brake calipers (new seals, new stainless pistons)
Rebuilt Brake Master Cylinder
Rebuilt Clutch Master Cylinder
Refinished Tail Light Assemblies
Repainted Kamm Tail
Rear Bumper rustproofed inside and painted inside
New Interior Visors
New Bullet Door Mirror
Seats Reupholstered
Differential Oil Topped Up
All Rock Pecks Touched Up

It feels great to have it back on the road again!